Synthesis of a Fe3O4-rGO-ZnO-catalyzed photo-Fenton system with enhanced photocatalytic performance

In this work, we designed a magnetically-separable Fe₃O₄-rGO-ZnO ternary catalyst, ZnO anchored on the surface of reduced graphene oxide (rGO)-wrapped Fe₃O₄ magnetic nanoparticles, where rGO, as an effective interlayer, can enhance the synergistic effect between ZnO and Fe₃O₄. The effects of three operational parameters, namely irradiation time, hydrogen peroxide dosage, and the catalyst dosage, on the photo-Fenton degradation of methylene blue and methyl orange were investigated. The results showed that the Fe₃O₄-rGO-ZnO had great potential for the destruction of organic compounds from wastewater using the Fenton chemical oxidation method at neutral pH. Repeatability of the photocatalytic activity after 5 cycles showed only a tiny drop in the catalytic efficiency.     

Effects of the number of benzene rings on the properties of single-source ZrC-based liquid precursors and nano zirconium carbide powders thereof

Effects of carbon source in single-source ZrC-based liquid precursors on the properties of the precursors and precursor-derived nano ZrC powders were investigated. The liquid precursors were prepared by directly blending and heating zirconium n-butoxide with either 2,4-pentanedione, benzoyl acetone or 1,3-diphenyl-1,3-propanedione additives which have the same chemical composition and structure except for the number of benzene rings (0, 1 and 2, respectively) in order to control the carbon content in the precursors. The ceramic yield of the precursor decreased as the number of benzene rings in the precursors increased. The stability of the precursors in air and the carbon content of the ceramic powder increased when using 1,3-diphenyl-1,3-propanedione additive. X-ray pure nano zirconium carbide powders with ultra-fine size (30 nm), isotropic shape and homogeneous particle size distribution were synthesized from the liquid precursors containing two benzene rings in the structure. Compared with ZrC powders derived from the precursors containing zero or one benzene ring, the powder from the precursor containing two benzene rings was finer and more homogeneous in size distribution.     

Degradation mechanism of high alumina refractory bricks by reaction with deposits in a rotary kiln for fluxed iron ore pellets production

The formed deposits wear out of refractory wall linings in the rotary kiln and may cause production disturbances. This study describes the chemical composition and mineralogical phase components at the deposit/refractory interface in the rotary kiln for fluxed iron ore pellets production. The main phases of refractory bricks are corundum and mullite, while the deposits mainly contain hematite and silicates. The main phases in the deposit/refractory brick contact zone are hematite, anorthite (CaAl₂Si₂O₈), mullite, corundum, and silicates. Moreover, the hematite phases in the deposit/brick interface averagely contain 6.98 wt% Al and 1.38 wt% Ti. The silicates in the contact zone contain higher aluminium content and lower iron content than the silicates in the deposits. Finally, the thermodynamic analysis indicates that the main phases in the deposits can react with the refractory to form Al₂Fe₂O₆, CaAl₂Si₂O₈, feldspar, and liquid phases lead to the degradation of bricks in the kiln during the iron ore pellets production.     

等离子体改性海绵铁活化过硫酸盐处理含酚废水

采用低温等离子体技术对海绵铁表面进行改性，并将其用于活化过硫酸盐（PS）处理含酚废水。通过氮气等温吸附（BET）、X射线衍射（XRD）和扫描电子显微镜（SEM）等手段对改性前后的海绵铁进行表征分析。以苯酚为目标污染物，通过静态实验考察催化剂投加量、催化剂/PS摩尔比、pH和苯酚初始浓度对等离子体改性海绵铁活化PS处理含酚废水的影响。结果表明，改性后的海绵铁比表面积、孔容及孔径均有增大，活化PS能力显著提高；在最佳反应条件（等离子改性海绵铁的投加量为0.4g/L，催化剂/PS摩尔比为1∶15，溶液pH为2，苯酚的初始浓度为250mg/L）下，苯酚的去除率可达95%；反应过程符合二级反应动力学，主要是硫酸根自由基和羟基自由基起氧化作用。等离子体技术改性海绵铁活化过硫酸钠可有效去除水中苯酚，为实际含酚废水的处理提供一些思路。     

腾冲市茨竹地铁多金属矿成矿地质特征及控矿因素

腾冲市茨竹地铁多金属矿现目前是一座正在开采的以磁铁矿为主、共（伴）生锡钨矿的小型矿山。为了增加矿山资源储量、延长矿山服务年限，通过对矿区的地质特征阐述和对矿区地层岩性、构造、岩体等控矿因素的分析研究，总结了矿区成矿规律并形成了矿区的成矿模式，为矿区深部探矿、外围找矿提供了一定的理论依据。     

Microstructure,hardness, toughness and abrasive wear resistance of 16.0 wt. % chromium white iron after continuous and cyclic destabilisation treatment

Destabilisation of as-cast chromium white iron with 16 wt-% chromium are performed by continuous destabilisation treatment for 4 h and short duration (0.66 h) cyclic destabilisation treatment at 900, 950, 1000, 1050, and 1100 °C. Continuous destabilisation causes secondary carbides precipitation from austenite which on slow cooling transforms to pearlite matrix. Cyclic destabilisation treatment causes similar precipitation of finer secondary carbides following shorter period austenitisation and a matrix containing martensite and retained austenite on forced-air cooling. After continuous destabilisation, hardness falls below the as-cast value (HV622); whereas it rises to HV950 after cyclic destabilisation treatment. The as-cast notched impact toughness (4.0 J) increases to 8.5 J or more after both continuous and cyclic destabilisation at 1050 and 1100 °C. Abrasive wear resistance after continuous destabilisation improves only at higher wear load (49.0 N), while after cyclic destabilisation it supersedes the as-cast and Ni-Hard IV performance at both low (19.6 N) and high (49.9 N) wear load.     

Computing approximate blocking probabilities for transparent waveband switching based WDM networks using hierarchical cross-connects

An analytical model is presented to study the dynamics of wavelength division multiplexing (WDM) networks with waveband switching (WBS). The reduced load approximation method is considered to compute approximated network blocking probabilities in WBS-based WDM networks. The analytical model considers the link blocking probability due to insufficient link capacity and an impact of the waveband granularity (G). The analytical model also considers the node blocking probability due to unavailability of a switch port at the wavelength cross connect (WXC) layer of an Hierarchical cross connect (HXC) switch node. The set of nonlinear equations is obtained with the link independence assumption and solved using repeated substitutions. The accuracy of the analytical model is examined by comparing with simulation results considering the random-fit algorithm for waveband and wavelength assignments in different network scenarios. Lightpaths are routed between source and destination (s-d) HXC switch nodes using shortest path first (SPF) routing. An impact of the switch parameter to limit the input and the output WXC switch ports of an HXC switching node is also being investigated using the analytical model as well as through simulation results.     

Replacing Mg2+ by Fe2+ for RNA-Cleaving DNAzymes

It has been proposed that Mg²⁺ and Fe²⁺ are very similar in interacting with ribozymes and some protein-based enzymes, but their activities with DNAzymes have yet to be studied. Here, the activity of Fe²⁺ as cofactor for a few RNA-cleaving DNAzymes is investigated. 17E is a well-studied DNAzyme that is active in the presence of many different divalent metal ions; it is highly active with Fe²⁺ with an apparent K_d of 29.7±2.3 μm and a k_obs of 1.12±0.11 min⁻¹ in the presence of 1 mm Fe²⁺ at pH 7.5. Fe²⁺ has 21-fold higher activity than Mg²⁺. Six different DNAzymes are then tested, and only the DNAzymes active with Mg²⁺ (17E, 8–17, and E5) are active with Fe²⁺. Fe²⁺ has 25 and one- to twofold higher activity than Mg²⁺ for the 8–17 and E5 DNAzymes, respectively. In pH>7 buffer and in presence of air, 1 mm Fe²⁺ results in a nonspecific degradation of the DNA strand due to reactive oxygen species (ROS). Cleavage reactions in anoxic environment and antioxidant ascorbate can be used to overcome the effect of oxidation. The findings provide insights for potential DNAzyme catalysis in the early Earth, and they further support the similarity between Mg²⁺ and Fe²⁺ in enzyme catalysis.     

伞帽用高铬铸铁在热强碱腐蚀环境下的磨损分析

针对氧化铝行业中常用的Cr28和Cr20高铬铸铁伞帽在相同工况条件下的磨损机理进行分析,并对比研究了实际生产中两种失效材料的成分、组织及性能。结果表明,伞帽部件在高温强碱腐蚀条件下受到外界冲刷时,磨损量由微切削磨损与变形磨损这两种机制共同决定。含铬量较高的Cr28高铬铸铁,其冲刷和抗腐蚀磨损性能均优于Cr20高铬铸铁。伞帽服役寿命主要受浆料和表层的铸铁材料两大因素影响。两种试验材料经淬火+回火处理后,基体组织中主要为回火马氏体+M₇C₃型碳化物+少量残留奥氏体,其中含铬量较高的Cr28高铬铸铁中共晶碳化物含量更高,且分布更加弥散,其平均硬度值为64.0 HRC,高于Cr20高铬铸铁的60.2 HRC。最终确定Cr28高铬铸铁作为伞帽材质更能满足氧化铝生产及设备检修周期的需要。     

攀西地区白马辉长岩型超低品位钒钛磁铁矿选铁试验研究

论文以攀西地区白马辉长岩型超低品位钒钛磁铁矿为研究对象,查明了该矿石中化学组分、矿物组成、铁和TiO₂的相态。在此基础上进行了多粒级多磁场梯度干式磁选抛尾试验,通过铁和TiO₂的相态分析阐述了干式磁选抛尾的合理性；进行了干式磁选精矿阶段磨矿阶段选别试验,二段磁选在-200目占80%细度下获得了TFe 57.78%、TiO₂ 7.72%、V₂O₅ 0.69%的铁精矿,铁精矿产率为12.93%、铁回收率51.56%,相对磁性铁回收率为98.70%,V₂O₅回收率78.26%。结果表明该矿石虽然铁品位低,仍具综合回收利用价值。